Lawrence Livermore National Laboratory



2015

May 17–20, 2015, Wayne King will present at Additive Manufacturing with Powder Metallurgy 2015, in San Diego.

July 7-9, 2015, Wayne King will make an invited presentation at Additive Manufacturing and 3D Printing International Conference, Nottingham, UK

2014

February 5-6, 2014 Chandrika Kamath presented an invited talk at Informatics in Materials Design and Discovery conference in Santa Fe, NM

February 16-20, 2014 Amanda Wu presented a talk at The 143rd Annual Meeting & Exposition of TMS in San Diego, CA

February 25-27, 2014 Wayne King presented an invited talk at AeroDef® Manufacturing 2014, in Long Beach, CA

April 14-16, 2014, Wayne King gave a plenary talk at the 2014 ASPE Spring Topical Meeting on Dimensional Accuracy and Surface Finish in Additive Manufacturing in Berkeley, CA

April 15-16, 2014 Wayne King presented an invited talk at ASPE 2014 Spring Topical Meeting - Dimensional Accuracy and Surface Finish in Additive Manufacturing, in Berkeley, CA

May 6-7,2014, Wayne King presented an invited talk at the Design for Additive Summit in Atlanta, GA

May 18-20, 2014, Wayne King presented an invited talk at the inaugural Additive Manufacturing (AM) with Powder Metallurgy (PM) conference co-located with the PM2014 World Congress on Powder Metallurgy & Particulate Materials in Orlando.

May 18-21, 2014 Wayne King presented an invited talk at Additive Manufacturing with Powder Metallurgy, in Orlando, FL

June 10-12, 2014, Wayne King presented, "Simulation and Modeling of the Metal Laser Powder Bed Fusion Process to Accelerate Certification" at RAPID 2014 at the Cobo Center, Detroit, Michigan.

August 4-6, 2014 Ibo Matthews will present a talk at The 25th SFF Symposium - Silver Anniversary Meeting, in Austin, TX

August 4-6, 2014 Saad Khairallah will present a talk at The 25th SFF Symposium - Silver Anniversary Meeting, in Austin, TX

August 4-6, 2014 Alexander Rubenchik will present a talk at The 25th SFF Symposium - Silver Anniversary Meeting, in Austin, TX

October 12-16, 2014 Amanda Wu will present an invited talk at MS&T 2014 Materials Science of Additive Manufacturing: Materials Characterization II, in Pittsburgh, PA

October 12-16, 2014 Bob Ferencz will present an invited talk at MS&T 2014 Materials Science of Additive Manufacturing: Modeling and Simulation II, in Pittsburgh, PA

October 21-23, 2014 Wayne King will present an invited talk at Inside 3D Printing in Santa Clara, CA

December 8th-10th 2014 Wayne King will present an invited talk at Additive Manufacturing in Government in Washington, DC

2013

July 12, 2013 Neil Hodge presented "Towards a Part-Level Finite Element Simulation of Selective Laser Melting (SLM)" at the 12th U.S. National Congress on Computational Mechanics in Rayleigh, NC.

August 13, 2013 Wayne King presented "Observation of "Keyhole Mode" Laser Melting in Laser Powder Bed Fusion Additive Manufacturing" at the Twenty Fourth Annual International Solid Freeform Fabrication Symposium – An Additive Manufacturing Conference, August 12-14, 2013, Austin, Texas

December 11, 2013 Wayne King will speak at the summit on Additive Manufacturing for Government, in Washington D.C

2012

October 1, 2012 ACAMM Launch